ANSIMAG KF封閉磁力驅動ETFE襯裏泵

No leaks for safe processing and handling of hazardous chemicals

ASME / ANSI B 73.3 standard chemical process sealless magnetic drive non-metallic centrifugal end suction pump.

這款ASME / ANSI B733.3標準泵涵蓋了各種尺寸,包括標準外部尺寸,使得由其他供應商製造的泵尺寸可互換,在不改變管道或底板的情況下高度可靠的ANSIMAG密封磁驅動泵。我們的密封磁力驅動泵符合標準設計規範和建築材料。

  • Flows up to 1,470 GPM (275 m³/hr)
  • TDH高達520英尺(110米)
  • Temperature Range -20 to 250°F (-30 to 120°C)

KM在低係統溫度配置中也可提供,是化學,專業化學和鋼鐵工業中大多數腐蝕性或酸性應用的理想選擇。

APPLICATIONS

Chemical Processing

  • Chlor-Alkali
  • 殺蟲劑
  • 殺蟲劑
  • 除草劑
  • 肥料

Hydrocarbon Processing

  • 酸水
  • 硫酸
  • Xylene
  • 甲苯

Upstream

  • 生產的水
  • LACT

水生和海洋

  • 海水
  • ca

Battery Manufacturing

  • 硫酸
  • Potassium hydroxide

Biofuels

  • 生物柴油
  • Ethanol

Food and Beverage

  • 香水

礦業

  • 氰化鈉鈉
  • 硫酸
  • 鹽酸

Pharmaceutical

  • 矽油(傳熱液)

紙漿和造紙

  • Chlorine
  • 硫酸

半導體製造業

  • 氫氟酸
  • 硫酸

Steel Finishing, Pickling, Etching and Plating

  • 鹽酸

水和廢水處理

  • Sodium hypochlorite
  • Sodium hydroxide
  • 硫酸
  • 氯化鐵

憑借可靠,安全,緊湊,高效,ANSIMAG封閉磁力驅動ETFE襯裏泵提供了許多操作效益:

  • 磁力驅動器:this patented technology hermetically seals the inner magnets, isolating them from process fluid, which maintains magnet integrity for the life of the unit.
  • 關閉耦合設計:leverages off-the-shelf NEMA C Face or IEC-B5 Flange motors, and still provides a small footprint, quiet operation and low maintenance.
  • Corrosion Protection:粉末塗層外部比環氧基塗料更耐用和化學抵抗。
  • 輕鬆服務:ANSIMAG Back Pull Out design enables the Drive End to be serviced without breaking into the Wet End.
  • 密封遏製:凱夫拉爾纖維/環氧construction provides unsurpassed pressure handling capability.
  • 徑向推力:All ANSIMAG pumps feature a fully-supported shaft to eliminate radial shaft deflection at low flow operating conditions.
  • 零泄漏:A single, fully-contained O-ring eliminates possible leakage.
  • Chemically Resistant Lining:碳纖維增強ETFE對大多數化學品耐藥。
  • 耐用結構:Ductile iron exterior is designed for heavy-duty chemical applications.
  • 軸向推力墊圈:increase the allowable operating range over thrust balanced methods. This increases the pump’s reliability through a positive thrust surface that is unaffected by cavitation, solids or transient suction conditions.
  • 簡單的密封設計:僅由9個濕潤的部件組成,ANSIMAG泵可以快速且容易地修複該領域。可以在不需要特殊工具或培訓的情況下進行常規維護或維修。
  • 可更換的葉輪:a single-piece replaceable impeller is attached to the inner magnet drive via ANSIMAG’s patented tongue & groove system. The separation provides a cost effective approach to warehouse spare parts management and re-rating operations.
  • 奔跑 - 生活襯套:碳化矽襯套為泵的壽命提供了近的免維護操作。
  • 全封裝的內部驅動器:提供無與倫比的化學攻擊抵抗力。

US 60 Hz

  • Heads to 520 ft
  • Flows to 1,470 gpm
  • Maximum Motor Power 100 HP
  • Temperature Range -20 to 250°F
  • Maximum Case Working Pressure 350 psi
  • Hydrotest壓力525 psi
  • 最大粘度900 SSU
  • Solids Range to 20%
  • 電機詳情NEMA IEC
  • 安裝配置水平關閉和長耦合
  • Dimensional Standards ASME / ANSI B 73.3
  • 可用液壓係統數7
  • 可用的法蘭ASME / ANSI Class 150 RF,300 RF

度量標準50 Hz.

  • 頭到110米
  • Flows to 275 m3/小時
  • 最大電機功率75 kW
  • 溫度範圍-30至120°C
  • 最大殼體工作壓力24千克/厘米2
  • Hydrotest壓力36千克/厘米2
  • 最大粘度200厘歇
  • 電機詳情Nema,IEC
  • Solids Range to 20%
  • 安裝配置水平關閉和長耦合
  • Number of available hydraulics. 7
  • 可用的法蘭
  • Carbon Fiber Reinforced ETFE
  • 玻璃纖維增​​強PFA(葉輪零件)
  • ETFE or PFA lined ductile iron (casing)

POWER MONITOR

Installed in the Motor Control Center (MCC), a power monitor measures the power required to operate the pump. By setting High and Low trip points, the power monitor is the perfect solution for protecting your pump from:

  • Dry running
  • Low flow operation
  • High flow operation
  • 嚴重的空化
  • Magnet de-coupling

LONG COUPLED

Long coupled configurations conform to ANSI B73.3 dimensions for easy replacement of mechanically sealed pumps (utilizing same baseplate, coupling, guard and motor).

SECONDARY CONTROL & CONTAINMENT

ASME B73.3 compliant back-up to control or contain leakage in the event primary pressure containment is breached.

固體處理

With its generous internal clearances, ANISMAG pumps are designed to handle liquids with solids up to 20%+ w/w, 1/8 inch diameter.

與競爭設計不同,ANSIMAG泵不依賴於封閉的內部濕潤的碳化矽磨損環(用非金屬卡環保持就位),可以捕獲固體或鎖定泵。

經常處理固體:

  • 無機鹽
  • Fine Sand
  • 苛性沉澱物
  • 二氧化鈦(油漆和塗料)
  • Slag (Steel Pickeling)
  • Carbon Black
固體處理

LIQUID LEAK DETECTOR

Solid state device for detecting liquid in the event of a leak in the primary containment shell.

幹式耐軸承>

用碳徑向襯套擬合一個Ansimag泵減少了泵軸在過程中鐓鍛或幹燥運行操作條件下延伸泵壽命的摩擦係數。

BASETEK® BASEPLATES

Baseplates pre-engineered, chemically resistant polymer concrete bases provide a superior foundation to channel steel alternatives.

澳门金博宝188官方网站域名

桑迪is the world leader in delivering low-flow, high-head, integrally geared centrifugal pumps and compressors, sealless magnetic drive pumps and diaphragm gas compressors. Sundyne’s precision-engineered, highly reliable, safe & efficient pumps and compressors are used in chemical, petrochemical, hydrocarbon, hydrogen, pharmaceutical and industrial applications. Sundyne pumps and compressors are also available in API, ANSI/ASME, ISO, and other industry compliant designs.

Baidu
map